Edimax Technology IC-7000PTn V2 - Manual (Page 57)

SMTP port
Specify the port number of the SMTP server you wish to use here. By default (and
the setting of most of SMTP servers) it’s ‘25’.
SMTP Auth
Select ‘Enable’ if your SMTP server requires authentication, select ‘Disable’ if it’s
not required. If you don’t know if your SMTP server requires authentication, please
refer to the setting of your email software or ask your ISP / network administrator.
SMTP Account
Input the SMTP account (username) of your SMTP server here. In most cases, it’s
the same with your POP3 username (the one you used to receive email). Please
refer to the setting of your email software or ask your ISP / network administrator if
you’re not sure about this.
SMTP Password
Input the SMTP password of your SMTP server here. In most cases, it’s the same
with your POP3 password (the one you used to receive email). Please refer to the
setting of your email software or ask your ISP / network administrator if you’re not
sure about this.
OK Save settings in this tab.
Cancel Discard all settings in this tab.
57