Edimax Technology IC-7000PTn V2 - Manual (Page 63)

3-6 Scan
If you have more than one camera configured, and you wish to switch the displaying image between cameras,
you can click ‘Scan’ button to switch between all configured cameras.
NOTE: If a camera is configured but disconnected, it will still be displayed in a
scan sequence (you’ll see nothing and you’ll see ‘Disconnected’ text
displayed at the upper-left corner of display image).
Click ‘Scan’ button once to activate scan function (scan icon will become blue ), click again to stop
scanning (scan icon will become white ).
63