Edimax Technology IC-7000PTn V2 - Manual (Page 33)

2.4.3 Email
You can define the destination address of E-mail sending and mail server parameters here.
The descriptions of every setting in this menu will be given below:
Item Description
Recipient E-Mail
Address
Input the email recipient’s Email address here.
E-Mail Subject
Specify the title of sending email, so you can identify the mail sent from this
camera from others quickly.
SMTP Server
Input the IP address or host name of the SMTP server (the server that delivers
the Email for you) here.
If you don’t know, please refer to the SMTP server you’re using in your Email
software (like Outlook, Outlook Express etc.), or ask your network administrator
or ISP.
Sender E-Mail
Address
Input the Email address of mail sender, this will help you to identify the Email
sent by this IP camera by sender’s Email address.
NOTE: Some mail server would reject to deliver the Email from unknown sender,
it’s recommended to input your own Email address here, or any other actual one.
SMTP
Authentication
Some SMTP server requires mail senders to be authenticated before they can
send Email. If your SMTP server requires you to do so, please select ‘Enable’, or
select ‘Disable’ to disable it. If you don’t know, please refer to the SMTP server
you’re using in your Email software (like Outlook, Outlook Express etc.), or ask
your network administrator or ISP.
User Name
Please input the user name of SMTP server here, if your SMTP server requires
the use of authentication.
Password
Please input the password of SMTP server here, if your SMTP server requires
the use of authentication.
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Send a test email’ to send a testing Email to the address you set here, so you can
make sure the setting you specified here is correct and working.
33