Edimax Technology IC-7000PTn V2 - Manual (Page 48)

Full screen Click this button to switch to full screen mode (only display all camera’s image),
press ‘ESC’ key to quit full screen mode.
Scan
Click this button and the IP camera surveillance software will switch displaying
the image of all connected camera automatically. Click this button once to
activate scan function (scan icon will become blue
), click again to stop
scanning (scan icon will become white ).
Zoom out Zoom-out (To see more objects).
This function is only available for supported cameras.
Zoom In Zoom-in (Too see more details).
This function is only available for supported cameras.
PTZ control There are 8 directions in PTZ control ring. If the camera you connect support
PTZ, you can use PTZ control ring to change the direction that camera points
to.
This function is only available for supported cameras.
Home Click this button to return the camera to ‘Home’ (default) position.
This function is only available for supported cameras.
Recording Start video recording.
Configure Software / camera configuration.
Playback Playback a recorded video file.
Snapshot Take a snapshot of current camera.
Message display Displays all system messages like camera is disconnected etc.
Close window
(stop surveillance)
Terminates IP camera surveillance software.
Minimize window Minimizes IP camera surveillance software window.
Video displaying area Displays the image of all cameras by the display layout you selected.
48