Edimax Technology IC-7000PTn V2 - Manual (Page 32)

2.4.2 Motion Region
You can define the motion detection region within the image that camera captures, so this camera will ignore
motions which are not covered by the motion region setting, and reduce the chances of false alarm.
The descriptions of every setting in this menu will be given below:
Item Description
Region 1 – 3
Check the box to enable motion detection region 1 to 3. You can check multiple
boxes to enable multiple motion detection regions. When you checked a box, a
new region (and region number) will be displayed on captured image.
Sensitivity
Move the slide bar to change the motion detection sensitivity setting: Drag the
slide to the right to increase sensitivity (camera will detect minor changes in the
image), and drag the slide to the left to decrease sensitivity (camera will only
detect major changes in the image).
Refresh
In case the objects of the image captured by the camera moved, click this button
to reload the image captured by camera, so you can decide the motion detection
region more precisely.
Save Save motion detection region settings.
To change the motion detection region, you can ‘resize’ and ‘reposition’ it:
Move the mouse cursor to the eight dots located at the border of motion detection region, and the mouse
cursor will switch to , , or . You can click and hold mouse button and move the mouse to resize the
motion detection region.
To move reposition the motion detection region, move the mouse within the motion detection region, and the
mouse cursor will switch to . Click and hold mouse button and move the mouse to reposition the motion
detection region.
32