Edimax Technology IC-7000PTn V2 - Manual (Page 50)

3-3-1-1 ‘Camera’ tab
In this tab you can configure all cameras you wish to connect. Up to 16 cameras can be connected
simultaneously:
Here are the descriptions of all setting items:
Item Description
Channel Select the channel number you wish to set.
Camera Search All cameras found on your local network will be displayed in ‘Camera Search’ box.
Select
Select a camera listed in ‘Camera Search’ box, and click ‘Select’ button to fill all
parameters of selected camera in every camera configuration fields.
Refresh
Rescan all cameras on your local network. If you didn’t see the camera you
expected in ‘Camera Search’ box, or new cameras has been joined to your local
network after last scan.
Name*
Input the name of camera here. Default value is the first 6 bytes of camera’s MAC
address, you can change the name of camera so you can remember the camera’s
location of purpose easily.
Model Displays the model of selected camera, this field can not be changed.
IP* Input the IP address of camera.
Username* Input the user name of camera.
Web Port* Input the web port of the camera. By default it’s ‘80’.
Password
Input the password of camera. Default value is ‘1234’. You should change the
password if you changed the password of selected camera.
Video Format** Select the video encoding format of this camera (MJPEG or MPEG4).
Reset Clear all fields in ‘Camera Configuration’ section.
OK Save settings in this tab.
Cancel Discard all settings in this tab.
*: It’s recommended to use ‘Select’ button to fill the content of this field.
**: Only available for cameras support this function.
50