Edimax Technology IC-7000PTn V2 - Manual (Page 54)

3-3-1-4 Motion Record
With this function activated, only motions captured by the camera will be recorded, so you don’t have to waste
hard disk storage space on images you don’t need to pay attention to.
Here are the descriptions of all setting items:
Item Description
Channel Select the channel number you wish to set.
Enable Enable motion record function.
Disable Disable motion record function.
Recording Time
Select the time duration that camera will record when a motion has been
detected from dropdown menu in seconds.
Invoke alarm when
motion is triggered
Send an alarm when a motion has been detected by the camera.
Send mail when
motion is triggered
Send an email to a pre-defined address when a motion has been detected
by the camera.
OK Save settings in this tab.
Cancel Discard all settings in this tab.
WARNING: For applications that security is highly concerned, it’s not
recommended to use this function since some tiny changes you may need
to know may not be able to trigger the camera and the camera will not start
recording.
54