HONDA 2011 Odyssey - Manual (Page 463)

If you want to set the display to the
default setting, select ‘‘Reset’’ by
turning the interface dial, and then
pressing the ENTER button. The display changes as shown above.
Select ‘‘Yes,’’ and press the ENTER
button. You will see the message
‘‘Default display settings applied’’ on
the display for a few seconds.
Aspect Ratio
Select the ‘‘Aspect Ratio’’ by turning
the interface dial, then press the
ENTER button. You can choose
between ‘‘Wide’’ or ‘‘Zoom.’’ The
following settings are available:
Normal
Full
Super Full
Ultra Full
Super Zoom
Ultra Zoom
Wide
Zoom
Ultrawide Rear Entertainment System
460
10/07/17 10:35:59 31TK8600_465
2011 Odyssey