HONDA 2011 Odyssey - Manual (Page 49)

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
indicated by a small button above the
anchor point.
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for CHildren) at each of the
second and third row seats, and the
second row center seat (except LX
models).
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Move the seat belt buckle or
tongue away from the lower
anchors.
To install a LATCH-compatible child
seat in either outer second row seat:
1.
2.
3.
Installing a Child Seat with
LATCH
Installing a Child Seat
Using the Outer LATCH
46
LOWER
ANCHORS
BUTTON
Rigid type
10/07/17 09:40:26 31TK8600_051
2011 Odyssey