HONDA 2011 Odyssey - Manual (Page 636)

Remove the socket by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
Reinstall the base gasket.
Push the electrical connector back
onto the socket. Make sure it is on
all the way.
Turn on the lights to make sure
the new bulb is working.
Reinstall the cover.
Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
Remove the base gasket as shown,
then remove the socket by turning
it one-quarter turn
counterclockwise.
4.
5.
6.
9. 3.
8.
7.
(Taillight)
10.
(Back-up light)
3.
4.
Lights
Ma
int
e
na
nce
633
BULB
SOCKET
CONNECTOR
BULB
TAB
SOCKET
BASE GASKET
10/07/17 10:59:04 31TK8600_638
2011 Odyssey