Lights – HONDA 2011 Odyssey User Manual
Page 629
Advertising
Open the hood.
To change a bulb on the driver’s
side, remove the upper part of the
air intake duct.
Use a flat-tip screwdriver to
remove the holding clip, then
remove the upper part.
To change a bulb on the
passenger’s side, use a flat-tip
screwdriver to remove the holding
clip from the engine coolant
reserve tank, and then remove the
engine coolant reserve tank out of
its stay.
Remove the power steering
reservoir from the stay bracket to
get enough working space.
1.
2.
Lights
High Beam Headlights
626
HOLDING CLIPS
STAY
COOLANT RESERVE TANK
HOLDING CLIP
POWER STEERING RESERVOIR
STAY BRACKET
10/07/17 10:57:56 31TK8600_631
2011 Odyssey
Advertising
This manual is related to the following products: