HONDA 2011 Odyssey - Manual (Page 566)

CONTINUED
If you have done all of the above and
still cannot move the lever out of
Park, see
on
page .
To avoid transmission damage, come
to a complete stop before shifting
into Park. You must also press the
release button to shift into Park. The
shift lever must be in Park before
you can remove the key from the
ignition switch.
Use neutral if you
need to restart a stalled engine, or if
it is necessary to stop briefly with
the engine idling. Shift to the Park
position if you need to leave your
vehicle for any reason. Press on the
brake pedal when you are moving
the shift lever from neutral to
another gear.
Use this position for
normal driving. The transmission
automatically selects a suitable gear
for your speed and acceleration.
This position mechani-
cally locks the transmission. Use
Park whenever you are turning off or
starting the engine. To shift out of
Park, you must press on the brake
pedal and have your foot off the
accelerator pedal. Press the release
button on the front of the shift lever
to move it.
Press the brake
pedal and the release button on the
front of the shift lever to shift from
Park to reverse. To shift from
reverse to neutral, come to a
complete stop, and then shift. Press
the release button before shifting
into reverse from neutral.
To use D3, press the
D3 button when the shift lever is in
the ‘‘D’’ position. This position is simi-
lar to D, except only the first three
gears are selected instead of all five.
Use D3 when towing a trailer in hilly
terrain, or to provide engine braking
when going down a steep hill. D3 can
also keep the transmission from
cycling between third and fourth
gears in stop-and-go driving.
565
Except Touring models
Automatic Transmission
Shif t Lock Release
Neutral (N)
Drive (D) Park (P) Reverse (R)
Drive (D3)
D
riv
ing
563
10/07/17 10:50:12 31TK8600_568
2011 Odyssey