Installing a child seat – HONDA 2011 Odyssey User Manual

Page 56

Advertising
background image

Each third row seat has a tether
anchorage point behind the seat-
back.

Tighten the strap according to the
seat maker’s instructions.

Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.

You can also remove the rear head
restraints (see page

). The

removed head restraints should be
secured in the cargo area so they will
not be thrown while you are driving.
Make sure to replace the head
restraints when the child seats are
not in use.

After properly securing the child
seat (see pages

and

), lift the

head restraint, then route the
tether strap over the seat-back and
through the head restraint legs.

Tighten the strap according to the
seat maker’s instructions.

If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.

3.

3.

1.

2.

51

50

187

Third Row Installation

Installing a Child Seat

Dr
iv

er
and

P

asseng

er
Saf

et

y

53

TETHER ANCHOR POINTS

ANCHOR

TETHER STRAP HOOK

ANCHOR

Center Position (except LX models)

TETHER STRAP HOOK

10/07/17 09:41:21 31TK8600_058

2011 Odyssey

Advertising
This manual is related to the following products: