HONDA 2011 Odyssey - Manual (Page 83)

To adjust the outside temperature
display, press and hold the select/
reset knob for 10 seconds. The
display changes as shown above.
This indicator displays the outside
temperature in Fahrenheit (U.S.
models) or Celsius (Canadian
models).
The temperature sensor is in the
front bumper. The temperature
reading can be affected by heat
reflection from the road surface,
engine heat, and the exhaust from
surrounding traffic. This can cause
an incorrect temperature reading
when your vehicle speed is under
19 mph (30 km/h). When you start
your trip, the sensor is not fully
acclimatized, therefore it may take
several minutes until the proper
temperature is displayed.
If the outside temperature is
incorrectly displayed, you can adjust
it up to
5°F in U.S. models ( 3°C
in Canadian models) warmer or
cooler.
The temperature must be
stabilized before doing this
procedure.
Except LX model
Gauges
Outside Temperature Indicator
80
NOTE:
OUTSIDE
TEMPERATURE
DISPLAY
: Press and release the
select/reset knob.
10/07/17 09:45:19 31TK8600_085
2011 Odyssey