Transferring call to another subscriber, Conference, Transferring call to another subscriber conference – AASTRA 6739i for OpenCom 1000 User Guide EN User Manual

Page 14

Advertising
background image

Using the Aastra 6739i

10

3. Ending toggling: Press the goodbye key

to terminate the current call.

4. Then press the trunk key where the other caller is waiting or press the

Hold softkey. You are now connected with the caller on hold once again.

Transferring Call to Another Subscriber

1. Press the

Transfer softkey or the transfer key

.

You hear the internal dialling tone. The person calling is put on hold and now
hears music on hold.

2. Dial the call number of the internal subscriber desired.

Transferring a call with notification: When the subscriber answers,
announce the call transfer. Press the

Transfer softkey or the transfer

key

.

Transferring a call without notification: When you wish to wish to transfer
the call without notification, wait for the ringing tone. Press the

Transfer softkey or the transfer key

. The caller on hold now hears the

ringing tone of the transfer destination and waits for the call to be accepted.

Conference

You can speak with two callers simultaneously in a so-called “three-party con-
ference”.

1. You are speaking with someone on the telephone.

2. Press the

Conf softkey or the

conference key. Your caller is put on

hold.

3. Dial the call number of the conference subscriber desired.

4. When the second caller answers, announce the conference. Press the

Conf softkey or the

conference key.

You are now connected with both callers in a three-party conference. The
display shows the list of conference partners.

5. Do the following to end the conference:

Disconnecting individual subscribers from the conference: Press the

softkey of the caller. This ends the connection to the caller selected.

Ending a conference: Put down the handset or press the goodbye key

to end the conference (connection to both callers).

Advertising