AASTRA 6739i for OpenCom 1000 User Guide EN - Manual (Page 31)

Configuring the Aastra 6739i
27
Settings via the Options Menu
Some Aastra 6739i configuration settings are made via the Options menu. You
navigate in this menu as follows:
1. Press the options key .
The Options list menu card appears.
2. Press one of the softkeys displayed to access the menu entry assigned to it.
– Use the navigation keys to browse through a displayed menu
card.
– Use the softkey to go back a menu level.
3. Press the goodbye key to exit the menu.
Use the “Aastra 6739i SIP IP Phone User Guide” when you require information on
the wide variety of settings of the Options lists menu.
Aastra 6739i Restarting
You have to restart the Aastra 6739i sometimes, for example, to activate a changed
trunk key assignment.
1. Press the options key .
The Options list menu card appears.
2. Press the Restart softkey.
3. Confirm the Restart The Phone? restart query with the Yes softkey.
The Aastra 6739i starts and is quickly ready for operation once again.
Deleting a Local Configuration
The Aastra 6739i saves local settings (e.g. audio settings, newly programmed or
changed function keys) in a local configuration. Use the following procedure to
delete the local configuration and to restore the configuration that was configured
in the Web Configurator of the OpenCom 1000 communications system.
1. Press the options key .
The Options list menu card appears.
2. Press the Advanced softkey.
The display shows Enter Administrator Password.