AASTRA 6739i for OpenCom 1000 User Guide EN - Manual (Page 21)

Using the Aastra 6739i
17
2. Use the navigation keys to go to the desired entry.
To listen to the message, pick up the handset or press the Loudspeaker
key
. The voicebox is called. The next steps are voice controlled. Follow the
Voice menu instructions.
If you would like to access the voicebox in the handsfree mode, press the
handsfree key
and then the Dial softkey.
Further options:
– To show detailed information on the entry selected, press the softkey.
Date and time of receipt of the message as well as duration of the message are
shown.
– Press the Backspace softkey to delete the selected entry.
– Press the Tone -> on / Tone -> off softkey to switch on/off the acoustic
signalling of incoming messages.
3. Press the Goodbye key to exit the voicebox system.
Busy Lamp Field
Use the “Busy Lamp Field” function key (BLF, busy lamp) to view another internal
subscriber’s state: free or busy. You have to configure a separate BLF function key
for every desired subscriber number (see Web Configurator of the OpenCom 1000
starting on page 20). The connection state of the subscriber connected will be dis-
played on the function key as follows:
■ Unlit ( ): The subscriber is free. Press the BLF function key to call the
subscriber.
■ Blinking ( ): The subscriber is being called. Press the BLF function key to
accept the call (“Pickup”).
■ Lit ( ): The subscriber is busy.