AASTRA 6739i for OpenCom 1000 User Guide EN - Manual (Page 26)

Configuring the Aastra 6739i
22
Aastra 6739i Web Configurator
You can also change the settings of the Aastra 6739i using a separate terminal
Web Configurator if the administrator of the OpenCom 1000 communications
system has authorised this.
1. Press the options key .
The Options list menu card appears.
2. Press the Advanced softkey.
The display shows Enter Administrator Password.
3. Enter the administrator password with the number keys (please refer to
Aastra 6739i Passwords on page 30). Confirm using the Enter softkey.
The Advanced menu card appears.
4. Press the Network softkey.
5. Notate the series of digits displayed under the IP Addresses header.
6. Start a Web browser on your workstation computer. Enter the IP address of the
Aastra 6739i into the address line of the Web browser and confirm with the
enter key.
Logging in on the Aastra 6739i Web Configurator
7. Enter “user” into the User name field of the login dialogue. Leave the
Password field empty. Confirm using the OK button.
The Aastra 6739i Web Configurator appears.