AASTRA 6739i for OpenCom 1000 User Guide EN - Manual (Page 24)

Configuring the Aastra 6739i
20
Configuring the Aastra 6739i
This chapter describes the configuration settings relevant for operating the
Aastra 6739i on the OpenCom 1000 communications system.
A description of all possible settings of the Aastra 6739i can be found in your
“Aastra 6739i SIP IP Phone User Guide” (please refer to page 4).
Automatic Configuration
The Aastra 6739i supports the “Automatic Commissioning / Auto Provisioning”
feature. Use this feature to commission an Aastra 6739i without the administrator
of the OpenCom 1000 communications system having to configure it beforehand.
Automatic configuration must be authorised by the administrator of the
OpenCom 1000 communications system.
1. If the Aastra 6739i is currently in operation, press the logout function key and
confirm restarting with the OK softkey. If a log-in process was previously
interrupted, press the login softkey.
The Callno./ID field appears.
2. Activate the Callno./ID field by pressing on it. A softkey keyboard appears on
the display. Enter an unused call number to initiate automatic configuration
and press the Enter softkey.
3. Activate the PIN field by pressing on it. Enter the numeric password (PIN) that
the administrator of the OpenCom 1000 communications system set up for
automatic configuration and press the Enter softkey.
4. Confirm using the OK softkey.
The Aastra 6739i restarts – it is then configured with a default configuration for
the desired new call number.
Web Configurator of the OpenCom 1000
When the system administrator given you authorisation to use the Web Configu-
rator of the OpenCom 1000 (OCW) you can do the configuration of the terminal
function keys using a Web browser yourself.