AASTRA Office 70IP-b User manual - Manual (Page 14)

Using the Display and Operating Elements
14
Switching between Upper and Lower Case
You want to switch between upper and lower case while making an input in text mode.
Upper-case input is initially activated in text mode. After the first letter of a word has been entered, the text
mode automatically switches to lower-case input. You can use the Foxkey to switch manually between
upper-case and lower-case input.
Entering a Phone Number in Call Preparation
You want to enter a phone number without it being dialled automatically, so as to have time to check the
number and, if necessary, to correct it. The number is not dialled until you go off-hook, for example by
picking up the handset.
Correcting your Input
You notice you have entered a wrong digit or character.
You can delete an incorrect input either character by character or completely.
Moving the Cursor
You want to go to a certain character for an input or correction.
Using the Cursor keys you can move the cursor left (–) or right (+).
A>a To switch to lower-case input: Press the "A>a" Foxkey.
a>A To switch to upper-case input: Press the "a>A" Foxkey.
Note
Enter a phone number in call preparation.
The display shows the phone number.
To delete the last character: Press the Correction key.
To end the input without saving: Press the END key.
Note
You can go to the character you want to delete with the Cursor keys
(see "Moving the Cursor").
You can move the cursor with the navigation key or the volume/cursor key.
☛
c
END