AASTRA Office 70IP-b User manual - Manual (Page 41)

Using Added Features to Make Efficient Phone Calls
41
Activating/Deactivating Functions by Remote Control
You are not at your desk and want to set various functions on your phone from a different phone.
You can activate / deactivate many of your phone's functions by remote control from a different phone.
Remote control has to be enabled for your phone in the system.
Remote control is possible from within and from outside the system. For external remote control, the system
administrator has to give you the dial-in number.
The remote control is initiated using a special */# procedure. You can then enter the function commands and
*/# procedures in the usual way.
To remote control from a third-party phone: Pick up the handset.
To initiate remote control:
Enter */# procedure *06.
Enter your phone number.
Enter the */# procedure for activating/deactivating the function you want.
Put the handset on-hook.
☛
☛