AASTRA Office 70IP-b User manual - Manual (Page 59)

Installation and First-Time Operation
59
Wall mounting
You can also mount the phone on the wall. To do so, screw the stand onto the wall as a bracket and hook the
phone onto the stand.
Note: As there is only a limited amount of space between the sockets on the back of the phone and the wall
on which it is mounted, you need to use a ribbon cable with a short connector for the cord. Ask your dealer
for a list of suppliers for a suitable ribbon cable.
1. Fit the screws for securing the stand and mount the stand (Figure A).
2. Connect the handset cord and the phone cod to the phone (Figure B). Refer to the paragraph
"Connecting the phone" for the correct connection assignment.
3. Insert the phone into the stand horizontally (Figure C-1) and slide downwards (Figure C-2).
4. Unscrew the cams for holding the handset (Figures D-1 to D-3).
5. Insert the handset.
1
2
1
2
3
A B
C D
151 mm
145 mm
130 mm
65 mm
3.5 mm