AASTRA Office 70IP-b User manual - Manual (Page 54)

Personalizing Your Phone
54
Clearing a Key
You want to clear the assignment made to a configurable key.
The function "Delete key" is available for this purpose in the configuration mode.
Configuring Line Keys
This section explains how to adapt your Line key settings to suit your personal requirements.
Note: Your system administrator will determine whether your phone has Line keys.
Setting the Response of a Line Key
You want to set the response of a Line key in case you are called on that Line key.
You can choose whether you also want a ringing signal in addition to the flashing Line key when you receive
a call on a Line key. You can configure a ringing delay for the ringing tone.
You can choose between answering directly using automatic hands-free operation, picking up the handset,
and pressing the Team key to answer a call.
Answering an external call using automatic hands-free operation is not available.
<long> Press the configurable key and hold it down for a moment.
The display shows the key type.
– or –
<long> Press the Foxkey with a long keystroke.
The display shows the key type.
Use the navigation key to select the "Clear key" entry.
OK To clear a key: Press the "OK" Foxkey.
The key configuration is cleared.
<long> Press the Line key you want and hold it down for a moment.
The display reads "Line key".
Note
The Personal key is also treated as a line key.
OK Press the "OK" Foxkey.
The display shows the ringing properties: Ringing/Ringing delay".
v V
Use the "
v" or "V" Foxkey to select ringing/ringing delay.
"Off" for no ringing tone, "On" for immediate ringing tone, and "After 10
seconds", "After 20 seconds" and "After 30 seconds".
OK Press the "OK" Foxkey.
The display reads "Melody".