AASTRA Office 70IP-b User manual - Manual (Page 29)

Using Added Features to Make Efficient Phone Calls
29
Leaving a Message
You cannot be reached on your phone. You want any internal subscriber who calls you to get a message.
Requirement: The internal subscriber must have a phone capable of receiving messages.
Subscribers whose phone cannot receive messages are put through to your phone or rerouted to a
destination predefined within the system.
You can select the contents of your message from a list of 16 predefined texts. These texts can be edited to
suit your requirements. The predefined texts are specified in the system configuration.
Press the Menu key repeatedly until the display reads "Forwarding".
Forwarding Press the "Forwarding" Foxkey.
Press the navigation key repeatedly until the display reads "Forward to
message".
OK Press the "OK" Foxkey.
Use the navigation key to scroll through the predefined messages.
Edit the message contents, if necessary.
OK To activate a message: Press the "OK" Foxkey.
The display reads "Message activated".
Reset To deactivate a message: Press the "Cancel" Foxkey.
Note
If you activate a call forwarding unconditional, the message you have left on
your phone will be deactivated.
MENU
☛