AASTRA 620d for Aastra 400 User Guide EN - Manual (Page 64)

Personalizing your phone
64
eud-1291/1.0 – R1.0 – 01.2011
Configuring cordless phone functions
This section explains the procedure for making settings on your cordless phone.
Switching the cordless phone on/off
You want to switch your phone on or off.
Locking/unlocking the keypad
You leave your workstation and want to avoid accidentally pressing your phone keys.
You can lock the keypad against unintentional actuation. You can choose whether
you want the keypad to be unlocked automatically when you receive a call or whether
you prefer to unlock the keys manually in any case.
Switching the phone off:
Keep the End call key pressed down for approx. 2 seconds and answer Ok to
the safety prompt.
➔
The phone is switched off.
Or:
Function is also available via the menu: Menu > Settings > General > Switch off .
Notes:
• You cannot switch the phone off in a call.
• When the phone is switched off, incoming calls are stored in the call list.
Switching the phone on:
Pick up the phone from the charging bay and keep the End call key pressed
down for approx. 2 seconds.
➔
The phone is switched on.
Note:
If you cordless phone cannot find a system, the display shows "No system". You
can switch to an available system using Menu > Settings > System > System reg-
istrations.
Locking the keypad:
Keep the hash key pressed down for approx. 2 seconds.
➔
The keypad is locked.
Unlocking the keypad:
Press the Unlock softkey and the hash key.
➔
The keypad is unlocked.
Unlocking the keypad automatically:
Enable the Auto key lock via Menu > Settings > General .
➔
The keypad is locked automatically after approx. 10 seconds, is displayed.
The keypad is automatically unlocked when you receive a call. The lock is
reactivated immediately after the end of the call.