Personalizing your phone – AASTRA 620d for Aastra 400 User Guide EN User Manual
Page 74
Personalizing your phone
74
eud-1291/1.0 – R1.0 – 01.2011
You can activate or deactivate the Bluetooth manually.
Notes:
• Only one Bluetooth connection at a time is possible.
• To find out how to make phone calls with the headset, refer to the Chapter
, page
Press the navigation key to the right or the
Menu
softkey.
Settings
Scroll to
Settings
and press the
Select
softkey.
Bluetooth
Scroll to
Bluetooth
and press the
Select
softkey.
Enable Bluetooth
Activating/deactivating Bluetooth mode:
Scroll to
Enable Bluetooth
and press the
Select
softkey.
➔
The setting is stored,
is displayed.
Or:
The Bluetooth-mode is also available via the service menu: Press key 5 and
hold it down for a moment, >
activate Bluetooth
.
Note:
An activated Bluetooth mode does not imply that a Bluetooth connection is
running.
Subscribe headset
Pair new device:
Scroll to
Subscribe headset
and press the
Select
softkey.
Switch on the device you want and set to subscribe mode. Select the device
you want and enter the Bluetooth device PIN.
➔
Device is paired,
is displayed.
Select headset
List of paired devices:
Switch on the device you want, scroll to
Select headset
, press the
Select
softkey
and select a device from the list.
➔
The list of coupled devices is displayed.
Note:
The list is limited to 2 Bluetooth devices. Remove a device before you connect
another one.
Delete
Remove device:
Scroll to
Select headset
and press the
Select
softkey.
Select the device you want and press the
Delete
softkey.
➔
Device was removed.