AASTRA 620d for Aastra 400 User Guide EN - Manual (Page 76)

P e r s o n a l i z i n g y o u r p h o n e
76
eud-1291/1.0 – R1.0 – 01.2011
Changing the User PIN
You want to change the PIN used to lock/unlock your phone (see Chapter "Locking
your phone" , page 65 and "Unlocking your phone" , page 66 ).
The digit combination "0000" is set as default. You can select any 2 to 10-digit combi-
nation for your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the default
setting.
Notes:
• Your user PIN applies to all your phones.
• Do not confuse the User PIN with the Admin PIN (see chapter
"Changing the
Admin PIN" , page 77 ).
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
General
Scroll to General and press the Select softkey.
New user PIN
Scroll New user PIN and press the Select softkey.
➔
The display shows User PIN .
<Old PIN>
Enter the old PIN and confirm with the Ok softkey.
➔
The display shows New user PIN .
<New PIN>
Enter the new PIN and confirm with the Ok softkey.
➔
The display shows Confirm user PIN .
<New PIN>
Enter the new PIN a second time and confirm with the Ok softkey.
➔
The new PIN is stored.
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with */# procedure *47 (see "User’s Guide */#
Procedures" on the Aastra document portal: www.aastra.com/docfinder ).