AASTRA DT692 Cordless for MXONE Quick Reference Guide EN - Manual (Page 119)

C ORDLESS P HONE FOR MD E VOLUTION
119 1424-EN/LZT 103 090 Uen D 2010-02-12
The following text is displayed: Put headset in Pairing
mode
.
5. Press OK.
The phone searches for a Bluetooth headset to connect to.
6. If a headset is found, press Pair.
7. Enter the PIN code.
See the user manual for the Bluetooth headset.
8. Press OK.
If the pairing mode was successful, the following message is
displayed: Pairing successful.
When a Bluetooth headset is connected, is displayed.
18.2 System
The cordless phone supports GAP/CAP standard. This makes it
possible to log on to any GAP compatible system with your phone. Only
available systems are displayed.
18.2.1 Selecting a System
To select a system, do the following:
1. Press Menu, select , and press Select.
2. Select System, and press Select.
3. Select Change system and press Select.
4. Select Automatically (or a specific system from the list), and press
Select.
If the phone is set to Automatically, a system will be selected
according to the priority list.
18.2.1.1 Setting System Priority
The default order of priority is the order of entered subscriptions. This
means that the first subscribed system has the highest priority. This list
can be edited by the user. It is possible to set the systems in priority by
moving them up or down in the list. It is also possible to get priority infor-
mation by selecting Info.