AASTRA DT692 Cordless for MXONE Quick Reference Guide EN - Manual (Page 17)

C ORDLESS P HONE FOR MD E VOLUTION
17 1424-EN/LZT 103 090 Uen D 2010-02-12
Loudspeaker
A separate loudspeaker for the loudspeaking function is placed at
the back side of the phone.
Microphone
The microphone is placed at the front bottom side of the phone.
Clips
There are two different belt clip options to the cordless phone; a
standard (hinge) clip and a security (swivel) clip. Use the clip to
attach the phone to a belt or similar. See also Belt Clip on page 127.
It is also possible to use the phone without any clip.
Battery
The battery is a rechargeable Li-Polymer battery, placed under a
battery cover. The battery is fully charged within four hours.
3.2 Display Information
The icons and text in the display indicate functions and settings available
to the user. The display gives visual feedback on all actions performed,
and also textual warnings, see figure 2 on page 17. The owner ID can be
set manually by the user.
Note: If a name is available it is displayed together with, or instead of,
the number.
Figure 2: Example of a display in idle mode
Status bar The top row (Status bar) is used for icons giving the
user information about signal strength, missed call,
new message, phone lock, key lock, sound off, time
and battery status. This row is always visible.
Header bar The second row (Header bar) displays the current
date, headset connection, Bluetooth connection, and
system connection.
4
Menu
11:00
01/11/2009
223344
System A
Status bar
Header bar
Active area
Soft key bar