AASTRA DT692 Cordless for MXONE Quick Reference Guide EN - Manual (Page 83)

C ORDLESS P HONE FOR MD E VOLUTION
83 1424-EN/LZT 103 090 Uen D 2010-02-12
The call is transferred to the voice mail system.
Note: * is the default code for reaching voice mail from the auto-
mated attendant. It may have been replaced by #.
3. Dial your extension number (which is also your mailbox number).
A system message prompts you for your user password.
4. Enter your user password.
To change the user password from the default number 1234, see
Changing Passwords on page 104.
You are now connected to your mailbox.
Interaction with the voice mail system or the automated attendant is
carried out through the exchange of DTMF codes.
• For an internal call, transition to DTMF end-to-end dialing is auto-
matic.
• From an external analog DTMF extension, transition to DTMF
end-to-end dialing is the default.
• From a GSM mobile phone, transition to DTMF end-to-end dialing
may require a specific operation, depending on the GSM mobile
phone involved.
Transition to DTMF end-to-end dialing is also applicable for checking
your voice mail from a third party set within your facility. You activate the
feature by dialing the internal number to the automated attendant.
An alternative solution to accessing your mailbox from outside your
facility, is to dial your DID number. If your extension is successfully
connected to the voice mail system, the rest of the procedure is identical
to the one described above.
14.2.5 Mailbox Modes
A mailbox can be managed in one of the following three modes:
Answering mode Your mailbox plays an absence
message that you can manage
yourself.
Calling parties directed to your mailbox
will hear your message, but they
cannot leave a message for you