EVS IPDirector Version 6.2 - June 2013 VTR CONTROL PANEL User Manual - Manual (Page 15)

Area Description / See also…
VTR being used.
The Preroll value can be changed manually by entering numbers in
this field.
6. Speed bar The speed bar allows you to move within the media at a variable
speed.
See section "Speed Bar" on page 16.
7. Transport
commands Those commands are used to browse in and play the tape media.
See section "Transport Buttons and Shortcuts" on page 16 for the
list of transport buttons and shortcuts.
8. Record
button This button is used to record media from an EVS video server to a
VTR device. The player channel on which the media is loaded must
have been connected to the VTR device.
9. Eject
button This button is used to eject the tape from the VTR.
2.3.3. VTR Name Contextual Menu
A contextual menu appears when you right-click the VTR Name field.
The following table describes the commands available from the contextual menu.
Menu Item Description
[List of
available
VTR devices] Provides the list of VTR devices available on the XNet network, and
visible to the current user, which can be assigned to the VTR Control
Panel.
See section "Assigning a VTR Device" on page 15.
2.4. Clip Creation Pane
2.4.1. Introduction
The Clip Creation pane provides the functions to create clips. It is used together with the
Clip Information pane which allows to enter clip metadata.
2.4.2. Overview of the Clip Creation Pane
Illustration
The Clip Information pane contains the areas highlighted on the screenshot below:
IPDirector - Version 6.2 - User Manual - VTRControl Panel
2. User Interface 7