EVS IPDirector Version 6.2 - June 2013 VTR CONTROL PANEL User Manual - Manual (Page 22)

Area Description / See also…
1. Batch List
Management fields /
buttons This area provides a series of fields and buttons used to
manage the batch lists containing the clips to digitize.
See section "Batch List Management Buttons" on page 14
for a description of each button.
2. Batch List grid This area displays the list of clips which have been added
to the batch list in order to digitize them at once.
See section "Batch List Contextual Menu" on page 14.
3. Digitization buttons The Batch Digitize button is used to start the digitize
process of the batch.
The Abort button can be used to abort the digitize process
in progress.
2.6.3. Batch List Management Buttons
The table below gives a description of each Batch List Management button.
Field / Button Description
Batch List Name
field Displays the name of the currently active batch list (if any).
Open Opens an existing batch list.
Close Closes the active batch list.
New Creates a new batch list.
Modify Modifies the properties of the active batch list.
Delete Deletes a saved batch list.
Import Imports a batch list from a file.
Help Displays a help window about the file format used to import a
batch list.
Export Exports a batch list to a file.
2.6.4. Batch List Contextual Menu
A contextual menu is available when right-clicking a clip in the list.
The following table describes the commands available from the contextual menu.
Menu Item Description
Insert Add a new line in the batch list
Delete Deletes the selected clip from the batch list
Delete All Deletes all the clips from the batch list
Reset
Status Resets the digitization status of selected clips to Idle. This allows users
to restart the digitization process for clips when an error occurred.
14 2. User Interface
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A