EVS IPDirector Version 6.2 - June 2013 VTR CONTROL PANEL User Manual - Manual (Page 16)

Area Description
The table below describes the various parts of the Clip Information pane:
Area Description / See also…
1. Time
Information
fields Those fields provide information on the duration and IN and OUT
points of the clip being created.
See section "Time Information Fields" on page 8.
They can be used to create a clip. See section "How to Mark a Clip
on a Tape" on page 24.
2. Clip
Creation
commands Those commands are used to create a clip from the tape media.
See section "Clip Creation Buttons and Shortcuts" on page 23 for
the list of clip creation buttons and shortcuts.
Note
The GoTo IN and GoTo OUT functions are described in
See section "Transport Buttons and Shortcuts" on page
16.
3. Recorder
Channel
field This field displays the name of the selected recorder channel of the
EVS video server which will be used in the clip digitization process.
A contextual menu is available to select a recorder channel. See
section "Recorder Contextual Menu" on page 9.
An Change Recorder Input button will be displayed in the field
when the selected recorder channel is physically linked to a video
router. It allows users to change the assigned router IN port.
See section "Managing the Links with a Video Router" on page 21.
2.4.3. Time Information Fields
The following time information is displayed as follows for the clip being digitized.
8 2. User Interface
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A