EVS IPDirector Version 6.2 - June 2013 VTR CONTROL PANEL User Manual - Manual (Page 19)

Area Description / See also…
defined in the User Manager application are displayed in the Publish
To area.
Select the user groups to which the clips should be published.
7. Digitize
Type
options This area provides the different options to process digitization of
tape media.
See section "Selecting the Clip Digitization Type" on page 23.
8. Primary
TC This area allows to select which primary timecode will be used for
the ingested clip.
• User TC: timecode that is on the tape
• LTC: timecode based on the time the clip has been ingested in
the system.
9. Digitize
Process
buttons The Digitize button is used to start the digitize process.
The Abort button can be used to abort the digitize process in
progress.
2.5.3. Clip Information Fields
Four fields are available to enter data for the clip. They are described in the table below.
User Interface
Element
Description
Tape ID This identifies the tape on which the clip is stored.
Clip Name User-defined name for the clip. It can contain up to 24 alphanumeric
characters.
Only 12 characters of this name can be displayed by LSM systems.
VarID VarID is a 32-character ID with variable length and format. It is
automatically assigned to new clip. It is mainly used to ensure
redundancy on the system. It can be unique for a clip on the EVS
server level or on the XNet network level, depending on EVS video
server settings.
UmID Unique Material Identification. UmID is a fixed length 8–character ID.
The EVS server automatically assigns a UmID to each new clip. It is
used for the unique identification of a clip on an XNet network.
2.5.4. Interest Level Buttons
The Interest Level buttons allow users to assign an interest rating to a clip. Four interest
levels can be defined, from no star to 3 stars. The background of the button corresponding
to the selected interest level is blue. The default value is the no star level.
IPDirector - Version 6.2 - User Manual - VTRControl Panel
2. User Interface 11