EVS IPDirector Version 6.2 - June 2013 VTR CONTROL PANEL User Manual - Manual (Page 9)

1. Introduction
The purpose of the VTR Control Panel is to control a VTR (Video Tape Recorder) from
IPDirector. It is an advanced remote control, from within the IPDirector application.
Apart from playback and record control, it also allows the extraction of clips from a tape to
the EVS video servers. This process can be done for a single clip or multiple clips can be
"batch digitized".
The VTR Control Panel can be used according 3 modes:
• Transport mode: the VTR Control Panel works as a remote control for the VTR, from
within IPDirector.
• Clip Digitize mode: one or several clips can be digitized from a single tape to a
recorder channel on an EVS video server.
• Batch Digitize mode: several clips can be queued in a Batch list, so that they can all
be digitized in one process run.
IPDirector - Version 6.2 - User Manual - VTRControl Panel
1. Introduction 1