Clip type buttons, Keywords list, Send to destinations – EVS IPDirector Version 6.2 - June 2013 VTR CONTROL PANEL User Manual User Manual
Page 20
2.5.5.
Clip Type Buttons
The Clip Type buttons allow you to assign a clip type for use with Key and Fill operations.
•
The left button is used for normal clips. This is the default value.
•
The middle button is used for fill clips.
•
The right button is used for key clips.
Refer to section "Fill and Key Clips" for more information.
2.5.6.
Keywords List
The Keyword area allows you to assign up to five keywords to a digitized clip to qualify its
content.
You can proceed in three different ways.
You can start to type the keyword directly in the Keyword field and select a keyword
proposed in the Autocomplete list:
•
You can select keywords in an open keyword grid or an open dictionary.
•
You can type the number associated to a keyword in an open keyword grid.
Refer to section "Assigning Keywords to a Media" in the chapter "Keyword Management"
for a detailed procedure on how to assign keywords to a clip and how to un-assign
keywords.
2.5.7.
Send To Destinations
The destinations where a digitized clip can be transferred to are listed below.
•
the user's default bin, if any
12
2. User Interface
EVS Broadcast Equipment S.A. - June 2013
Issue 6.2.A