EVS XT3 Version 11.00 Configuration Manual - Manual (Page 103)

Example: 1SLSM 2PH + 2PLAY
The BNC connectors to be used as record and play channels in an SLSM configuration
with 1SLSM 2PH + 2 PLAY need to be cabled as shown below:
Available SLSM 3x Configurations
The table below shows the available SLSM 3 Phase configurations in SD/HD with a XT3
4U server, and how the BNC connectors should be cabled:
IN4/OUT3 IN3/OUT4 IN2/OUT5 IN1/OUT6
#REC
SLSM
3x
#REC #PLAY
Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link Prim.
Link Sec.
Link
1 0 0 REC1,3 REC1,2 REC1,1
1 1 0 REC2 REC1,3 REC1,2 REC1,1
1 0 1 PLAY1 MIX1 REC1,3 REC1,2 REC1,1
XT3 6UServers
Available SLSM 2x Configurations
The table below shows the available SLSM 2 Phase configurations in SD/HD with a XT3
6U server, and how the BNC connectors should be cabled:
97 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C