EVS XT3 Version 11.00 Configuration Manual - Manual (Page 188)

Audio meters
Description Shows/hides the audio meters on the OSD
Values Yes (default) / No
DB Adjust
Description Adjusts the value of the displayed audio meters.
Values From - 83.2 to 0.0 dB, with a variable increments (larger in low
values, and smaller with increasing values)
Default Value 0.0
Style
Description Specifies the style of the audio meters
Values Light Bars , Glowing Boxes , Dark Boxes , Light Boxes , Dark
Bars
Default Value Light Bars
Thickness
Description Specifies the thickness of the audio meters
Values Thin, Medium, Thick
Default Value Thin
3.8.4. Clips Settings
Introduction
The Clip settings relate to various aspects of the clip management: clip definition, storage
location, metadata, and cue points.
The Clips settings are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode:
◦
on pages 1 and 2 on the server-based application
◦ on page 1 on the web-based interface.
• in the Operational menu of the Remote Control Panel (2.X).
XT3 Server - Version 11.00 - Configuration Manual
3. Multicam Configuration 182