EVS XT3 Version 11.00 Configuration Manual - Manual (Page 123)

Example 3
The allocation of the source audio mono channels shown above means that:
• The audio source from the digital connectors is used for the material recorded on the
EVS server.
• The audio source 1 from the digital connector will be mapped to the 1st mono channel
of the material recorded on the EVS server, and so on.
Example 4
You will allocate the source audio mono channels as shown above when you want to send
the audio mono channels from REC1 to all other record channels.
The shortcut CTRL+0 allows you doing this more rapidly in the server-based application.
Audio Output Settings
Description
The audio output settings for audio allow users to:
• map the audio mono channels of the material stored on the EVS server to an output
mono channel of a play channel.
• specify which audio gain should be applied to each output mono channel.
• mute an output mono channel.
This can be defined for the three audio types: embedded audio, as well as digital and
analog audio, if the corresponding connectors are available on the hardware configuration.
117 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C