EVS XT3 Version 11.00 Configuration Manual - Manual (Page 177)

GPIs OUT - Function
Description Specifies the function that activates the output line.
Values The following functions can be triggered by a GPI OUT:
• Replace
GPIs OUT - Type
Description Specifies the type of GPI output signal that will trigger the
specified function.
Values The following values are possible:
• close The level changes to high level at
activation.
• close
pulse A rising edge pulse is generated at
activation.
• open The level changes to low level at
activation.
• open
pulse A falling edge pulse is generated at
activation.
GPIs OUT - Advance
Description Defines the time (number of seconds and/or frames), at which
the output will be generated ahead of the timecode linked to
the output line.
Values • 00s00fr to 02s00fr
• Disable
Default value Disable
GPIs OUT - Pulse duration
Description Defines the pulse duration (number of seconds and/or frames)
for pulse type output lines.
Values • 00s00fr to 02s00fr (2fr steps)
• Disable
Default value Disable
171 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C