EVS XT3 Version 11.00 Configuration Manual - Manual (Page 153)

The following screenshot presents the settings page of the Monitoring tab in the server-
based application and highlights the OSD settings area:
Genlock Error
Description Enables or disables the Genlock information display on the
output monitor.
If the Genlock reference is not correct, the !GkV message
appears on the output monitor.
Values Yes / No
Default value Yes
Disk Error
Description Enables or disables the disk error information display on the
output monitor.
As the server is equipped with a RAID disk array, the
operation can continue seamlessly even with 1 faulty disk. If 1
disk is disconnected during operation, the !Raid message
appears on all output monitors, and another message appears
when the operator shuts down the application, to invite him to
replace the disk and rebuild the RAID array.
Please, refer to the Technical Reference manual for details on
the RAID system and its maintenance.
Values Yes / No
Default value Yes
147 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C