EVS XT3 Version 11.00 Configuration Manual - Manual (Page 15)

2.1.2. Navigability and Commands
In the Server-Based Application
General Navigability
The following table presents the general commands to navigate in the Multicam Setup
window:
Command description Command key
Moving the cursor to the first item of the Tools menu F9
Moving the cursor to the first configuration line ESC
Moving down in the list of editable items
(configuration lines and Tools commands) TAB
Moving up in the list of editable items SHIFT+TAB
Displaying a Help window that gives a summary of
the commands F1
Configuration Lines
In the Configuration Lines area, a configuration line is highlighted when it is selected.
The main commands for configuration line management are presented below:
Command description Command key
Moving up in the list of configuration lines UP ARROW
Moving down in the list of configuration lines DOWN ARROW
Starting the server with a given configuration line ENTER on selected line.
Entering the Configuration window to edit the settings
related to a selected line F8
Renaming a configuration line CTRL + F1
Deleting a configuration line CTRL + DELETE
See "Configuration Lines" on page 11 for more commands on configuration lines.
9 2. Multicam Setup
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C