EVS XT3 Version 11.00 Configuration Manual - Manual (Page 88)

Secondary >
Primary v
Remote IPDP AVSP VDCP Sony EditRec Odetics DD35 LinX
Odetics
F&K VDCP
F&K
LinX - -
Odetics F&K - -
VDCP F&K - -
Parallel mode - REC Channels
The following table shows the supported protocol combinations in parallel mode on record
channels.
Secondary >
Primary v
Remote IPDP AVSP VDCP Sony EditRec Odetics DD35 LinX
Odetics
F&K VDCP
F&K
Remote -
IPDP - -
AVSP - -
VDCP - -
Sony - -
EditRec - -
Odetics - -
DD35 - -
LinX - -
Odetics F&K - -
VDCP F&K - -
Recorder Settings
Introduction
The Recorder settings allow specifying configuration settings associated to the record
channels.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode:
◦
on page 5, 6 or 7 on the server-based application.
◦ on page 1 on the web-based interface.
• in the Technical menu of the Remote Control Panel (T2.10 and T2.11).
XT3 Server - Version 11.00 - Configuration Manual
3. Multicam Configuration 82