EVS XT3 Version 11.00 Configuration Manual - Manual (Page 14)

# Name of area Description
• Import/export configuration lines
• Assign server facility name
• Import/export keyword files
• Export log files
• Options code management
• Hardware check
• Raid Configuration
• Set LAN PC address
• Set date and time
• Clear video disks
• Touch screen calibration
• Default to VGA
• Reboot
• Enable password for technical settings
4. Configuration
Summary This area shows a summary of the server parameters
for the configuration line selected in the Configuration
Lines area.
The summary displays the following information:
1. codec type - bitrate - video standard
2. based config - INs/OUTs - No. audios
3. SDTI No. - server name - server type
5. Task bar The Taks bar (Server-based application) displays
commands for the main actions in the window.
For more information, See "Navigability and
Commands" on page 9.
5'. Status bar The Status bar (web-based interface) displays:
• the Multicam Setup application status
• the date and time of the last refresh
• the Refresh button
6. Server Information This area displays the following information on the EVS
server:
• genlock status (OK or bad)
• timecode and timecode status (OK or bad)
• IP address of the LAN PC
XT3 Server - Version 11.00 - Configuration Manual
2. Multicam Setup 8