Hotchkis 80112 1970-1974 Plymouth Cuda TVS System - Manual (Page 24)

16366 66-70 B-Body, 70-74 E-Body
Hotchkis Performance LLC.
4
1970 B-Body Cars
A) ½” x 3” hex bolt
B) ½” SAE washer
C) Misalignment Spacers
D) Taper Adapter (note direction: tapered section inserts into tapered hole)
E) ½” Nylock Nut
F) ½” x 3-1/2” hex bolt
H) E-Body Spacer 0.184” Thick (P/N:16400146)
X) Center Link
Y) Spindle
5. Finishing Steps
Once the tie rods are bolted up, please have an alignment shop set your front
toe setting. Hotchkis suggests 1/16” of TOE-IN. If you do not have the Hotchkis
1110 upper A-Arms installed, you may want to check for bump steer. Add or
remove the spacers on the outer tie rod end to fine tune the bump steer. We
also offer spacers with varying thicknesses directly. Please call 562-907-7757.
P/N: 16400144 = 0.065” spacers
P/N: 16400145 = 0.092” spacers