10f install the bushings & brackets, 11f. install end links – Hotchkis 80112 1970-1974 Plymouth Cuda TVS System User Manual
Page 31
Advertising
10F Install the Bushings & Brackets
Lube the inside surface of the new bushings with the provided grease. Install the bushings on
to the bar. Install the bushing bracket onto the bushing. Due tolerances in subframes, you
may need to install one or two
1/8” spacers between the bushing and the subframe bushing
mounts. Please check the clearance the bar has inside the k-member. If it needs to move up
or down, use add or remove the spacers to achieve proper clearance. Use the provided 3/8
socket head bolts and nuts. These are course thread. Use the flat cut washers on the socket
head side and insert the bolts from the bottom
11F. Install End Links
Advertising