Hotchkis 22407R Subaru WRX Autocross Rear Sway Bar - Manual (Page 9)

9) Make certain the zerk caps covering the grease fittings are in place. Re-check all hardware for
tightness. Re-place the rear wheels and use the jack to remove the jack stands to lower the car,
if you have not done so already. You should now be finished installing your new Hotchkis sway
bar set!
IMPORTANT: For regular maintenance the bushings should be greased at least once a year
(15,000 miles) or whenever excessive noise occurs. Use a non-lithium based grease, as lithium grease
can wash out with water.