Hotchkis 2251 1994-Up Mustang Sport Sway Bars User Manual
Page 5
5
9)
With the bar hanging from the end links you can place the u-bolts over the rear axle.
Use the tube of Anti-seize included to apply a small amount to the ends of the u-bolts. If
you do not lubricate the threads,
you could potentially snap the u-bolts or damage the
nylock nuts when tightening them!
10)
Use the grease pack provided to apply a heavy coat of grease to the inside of the
bushings and place them over the bar. The split of the bushing should be towards the
rear of the vehicle. Place the bushing retainer brackets over the bushings.
11)
Slide the axle mounting brackets over the end of the u-bolts. Rotate the sway bar up to
the axle and push the bushing retainer brackets over the ends of the u-bolts. Place a
small washer and nylock nut on the end of the u-bolt to hold the sway bar to the axle.