Hotchkis 80110 1966-1969 Mopar B-Body TVS System User Manual
Page 36
Advertising
In the above picture the hole to the left is stiffer and the hole to the right is softer. Check that all
attaching hardware is tight. Make certain the zerk fitting caps are covering the grease fittings. Lower
the car from the jack stands and you’re done!
CHECK ALL HARDWARE
after the first five miles.
IMPORTANT
Grease your sway bar bushings at least once a year (every 15,000 miles) to help
prevent squeaking. Use a non-lithium based grease
only to lube the bushings. Lithium based
grease can wash out with water. If excessive squeaking occurs the bushings may be dry and
need servicing or replacement.
SEE NEXT PAGE FOR PARTS LIST!
Advertising