Hotchkis 80110 1966-1969 Mopar B-Body TVS System User Manual
Page 55
Advertising
4010 & 4011S/L
Hotchkis Performance LLC.
9
7. Prepare Frame for Welding
After you remove the mounting bracket and subframe connector, sand down the area of the
frame where you will be welding.
8. Spot Weld Mounting Bracket
Install the subframe connector again with the mounting bracket resting in place on top. Be sure
to use the screw jack to hold the subframe in place. Spot weld the mounting bracket and then
once again, remove the subframe connector.
Advertising